Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Cambridge Homeowners
A garage door that won’t close changes your whole day. It’s a security gap, a weather gap, and usually the one thing between your car and the street. We handle the repair itself: torsion and extension springs, snapped cables, bent tracks, worn rollers, dead opener electronics, cracked panels, and sensors that trip for no clear reason. Our technicians have up to 13 years of experience, and they arrive already familiar with the hardware on your door, whether it’s a LiftMaster opener or a Clopay panel system. Same-day service is available for most repairs, and the price is quoted and agreed before any work starts. Call (855) 870-5964 to get a technician booked.
What Our Garage Door Repair Service Includes
Your garage door is a system, not a collection of parts. A door that jerks and shudders usually has more than one thing wrong, and fixing only the visible symptom tends to bring the problem back within weeks. That’s why we diagnose the whole mechanism before quoting anything.
Panel Replacement
A panel replacement swaps out one damaged section of the door rather than the entire door. You need it when a panel is dented, cracked, or has started to delaminate, which happens with impact damage or with the freeze-thaw cycle that Cambridge winters put doors through. We match the panel profile and color to what’s already on the door wherever the manufacturer still makes it, and we check the hinges and rollers on that section at the same time so the new panel doesn’t sit out of alignment.

Spring Repair
Springs counterbalance the weight of the door. When a torsion spring breaks, the door becomes extremely heavy and dangerous to operate, and an extension spring that snaps can send hardware flying. This is the most hazardous repair in the trade, which is why we treat it as its own dedicated service rather than an add-on. Our technicians replace springs with the correct wire gauge and cycle rating for your door’s weight, then rebalance and test the full travel before they leave. If your door is stuck open or stuck shut, don’t try to force it. Call us and keep people clear of the door until we arrive.

Cable Repair
Lift cables run from the bottom corners of the door up to the drum on the torsion shaft. A frayed or snapped cable means the door can drop unevenly or jam completely, and the fraying usually starts where you can’t see it without looking closely. We replace cables in matched pairs, inspect the drums and the bottom bracket, and re-tension the system so the door lifts level on both sides.

Track Realignment
Tracks guide the door through its travel, and even a small bend throws the whole door off course. You’ll typically notice it as a door that rubs, binds, or drifts to one side as it rises. We straighten or replace the affected track sections and check that the vertical and horizontal tracks are plumb and square to each other, because a track that looks fine but sits a quarter inch out will wear your rollers out fast.
Roller Replacement
Rollers are the small wheels that ride inside the track, and they wear out quietly. A door that rattles, squeals, or shudders on the way up is often telling you the rollers have flat-spotted or the bearings have dried out. We replace them as a full set rather than one at a time, since mixing new rollers with worn ones puts uneven load on the track, and we lubricate the hinges and hinges points while we’re in there.
Sensor Calibration
The safety sensors at the bottom of the door frame stop the door from closing on a person, a pet, or an object. When they’re misaligned or the lenses are dirty, the door reverses or refuses to close, and it can look like an opener failure when it’s really a sensor issue. We realign the sensors, clean the lenses, check the wiring run, and confirm the reversal behaves the way it should under a test obstruction. This is one of the fastest repairs we do and one of the most important for a household with kids or pets.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on the brand you already have. Our technicians are certified to work on eight of the most common garage door brands on the market, which means they arrive familiar with the specific hardware already on your home rather than learning it on your driveway. If your opener is a LiftMaster, we know the logic board behavior and the travel-limit adjustments those units use. If your door is a Clopay, we know where those panels tend to wear and how the section joints hold up.
The same goes for Chamberlain openers, with their familiar wall console and safety-reversal setup, and for Genie units, which have their own quirks around force settings and remote pairing. We also handle Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Brand matters less than diagnosis: we figure out what’s actually failing and repair that, instead of steering you toward the parts we’d rather sell. If you have LiftMaster, Chamberlain, Genie, Clopay, or any other make, we can help.
Signs You Need Garage Door Repair Right Now
Some garage door problems can wait a few days. Others shouldn’t. Here’s what to watch for.
- The door reverses before it touches the floor. That’s usually a sensor alignment issue or a travel-limit setting that’s drifted. It’s an easy fix, but until it’s done the door won’t stay closed, which leaves your home open to the street.
- You hear a loud bang from the garage. A sharp report from the garage with no obvious cause is often a torsion spring breaking. The door will feel extremely heavy if you try to lift it manually, and it shouldn’t be operated until a technician has looked at it.
- The door lifts crooked or binds on one side. Uneven travel points to a stretched cable, a worn roller, or a track that’s out of alignment. Left alone, the misalignment puts stress on the opener and shortens its life.
- The opener runs but the door doesn’t move. That can be a stripped gear inside the opener, a broken spring, or a disconnected trolley. It’s worth a diagnostic rather than guessing, since the fix is different in each case.
- The door is loud enough to hear from inside the house. Grinding, squealing, or heavy rattling usually means dry or worn rollers and hinges. It’s not urgent on its own, but it’s the cheapest stage to catch before something wears through.
Our Garage Door Repair Process – Step by Step
- 1
You call, and we book the visit. We answer 24/7 and can usually get a technician out the same day for repair work. Tell us what the door is doing and what brand the opener and door are, and we’ll come prepared for that system.
- 2
We diagnose the whole door, not just the symptom. The technician tests the balance of the door by hand, checks spring tension and cable condition, runs the opener through a full cycle, and checks the safety reversal. We look at the tracks, rollers, and hinges in the same pass.
- 3
You get a written price before anything is touched. We explain what’s failing and why, lay out the repair options, and give you a written estimate. Nothing starts until you’ve agreed to the number on that estimate.
- 4
We do the repair and rebalance the system. Springs get replaced with the correct wire gauge, cables get replaced in pairs, and tracks get squared and checked against the door’s travel. We test the door through several full cycles under load before we call it done.
- 5
We walk you through what changed. You’ll see the door run, hear the difference, and know what to watch for going forward. If a part is near the end of its life but not failing yet, we’ll tell you so you can plan for it rather than be surprised by it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Cambridge?
Garage door repair in Cambridge typically runs $150 to $600 depending on what’s failing and how many parts are involved. A typical spring repair runs $180 to $340 for one spring; because a matched pair is usually replaced together, a pair costs about twice that. A cable repair runs $130 to $250, roller replacement $110 to $220, track realignment $120 to $240, and panel replacement $250 to $500. Opener repairs land between $120 and $320, and opener installation runs $250 to $550. A full new door installation, if the door is past repair, runs $700 to $2,200.
What drives the number up or down is mostly parts count and access: how many springs or cables are being replaced, whether the door is a single or double width, and whether the opener electronics need a board or just a gear kit. The estimate is free, and the written estimate sets the final price. If the technician finds something different once the door is opened up, the quote gets revised and agreed with you before any additional work starts, so the invoice matches what you signed off on.
| Repair | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
Garage Door Repair Near Cambridge – Our Service Area
We connect homeowners across Cambridge with vetted local professionals, and the same service reaches the surrounding cities: Somerville, Watertown Town, Medford, Belmont, Arlington, Brookline, Everett, Chelsea, Malden, Winchester, and Newton. Dispatch runs Sunday through Friday, 7am to 7pm, and we answer the phone 24/7. For urgent failures, same-day service is often available. If you’re outside Cambridge, our garage door repair page covers the Somerville side, and garage door repair covers Watertown Town.
Serving Cambridge, MA – Our Local Coverage Area
We serve Cambridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Cambridge
Garage door repair is the diagnosis and correction of a fault in the door’s mechanical system: springs, cables, tracks, rollers, hinges, panels, sensors, or the opener that drives it. It’s distinct from installation, which is a new door from measurement to final test. Most repair calls come down to a handful of failure points, and a good technician identifies which one is actually causing the problem before quoting parts. Call (855) 870-5964 for a free estimate.
Most repairs take between one and three hours on site, depending on the part. A sensor realignment or roller swap is typically under an hour, while a spring or cable replacement takes longer because the system has to be rebalanced and tested through full cycles afterward. The technician will give you a realistic time frame once they’ve diagnosed the door. Call (855) 870-5964 to book a visit.
Most garage door repairs in Cambridge run $150 to $600, with the exact figure depending on the part and how many are involved. Spring repair is typically $180 to $340 for one spring, cable repair $130 to $250, and opener repair $120 to $320. The written estimate sets the final price, and nothing starts until you’ve agreed to it. Call (855) 870-5964 for an exact quote, estimates are free.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. That covers most of what’s on Cambridge homes, including the smart openers that pair with a phone app. Our technicians know the common failure points on each of these lines, so diagnosis starts from experience rather than guesswork. Call (855) 870-5964 and tell us your brand.
Same-day service is often available for repair calls, but it depends on the schedule and the parts needed. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 870-5964 to check availability for today.
Repair work is backed by a satisfaction guarantee, and the warranty on parts depends on the manufacturer and the specific component being replaced. The technician will explain what’s covered on your particular repair before the work starts, so you know what you’re getting. That way there are no surprises later. Call (855) 870-5964 to talk through your repair.
Clear the area directly under and in front of the door, and move anything leaning against the tracks or the opener rail. If you can, have the garage door open for the technician to inspect from inside. Also note whether the opener light blinks in a pattern when the door fails, since that code often points straight to the fault. Call (855) 870-5964 to get your visit scheduled.
Schedule Your Garage Door Repair Service in Cambridge Today
Whether it’s a snapped spring, a door that won’t close, or an opener that’s gone quiet, we can get a technician to your Cambridge home. Call (855) 870-5964. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets the repair moving. The estimate is free, the price is agreed before any work starts, and no job kicks off without your sign-off. Full repair service details are on our garage door repair page.
Written by the team at Cambridge Garage Door Repair Co.