Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Cambridge?
Spring replacement in Cambridge typically costs $180 – $340 per spring. Because springs are almost always replaced as a matched pair, most jobs run closer to $360 – $680. Those are typical estimated ranges for the Cambridge market in 2026; the written estimate you get before any work starts sets the final price.
Cambridge Garage Door Repair Co handles spring work as its own dedicated service because a torsion or extension spring is the one part of the door that holds real danger. Our technicians have up to 13 years of experience, we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 870-5964 for a free estimate.
Spring Replacement Cost Breakdown (2026)
Here is how the numbers break down by part and job type. Each range is a typical estimate, not a fixed quote – what a technician finds on site and the written estimate you receive are what count.
| Line item | Typical estimated cost |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair of torsion springs | $360 – $680 |
| Single extension spring replacement | $180 – $340 |
| Spring repair as part of a general garage door repair | $150 – $600 |
| Cable repair (often done alongside springs) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Opener repair | $120 – $320 |
| Panel replacement | $250 – $500 |
| New door installation | $700 – $2,200 |
You’ll notice most spring jobs fall in a fairly tight band. What pushes a bill toward the top of the range is usually not the spring itself – it’s what else is worn out. A snapped spring often travels with frayed cables, a bent track, or rollers that have flat-spotted. On older doors, we also see unbalanced doors where the spring failure was a symptom rather than the root cause. A single spring swapped in while the rest of the door is failing is money spent twice.
Door weight matters too. A single-car door and a heavy double-car door need different springs, and a heavier door takes longer to balance and test. High-lift setups and doors with unusual headroom can mean custom springs, which sit at the upper end of the range. If you want the full picture on this service, our spring replacement page walks through what a proper replacement involves.
What Affects Spring Replacement Pricing in Cambridge
The range for one spring is $180 – $340, and a pair is about double that. Several things move you within those numbers.
- One spring or a pair. Springs are wound to share a load, so when one breaks the other is nearly as old and has done nearly as much work. Replacing both at once is the usual recommendation, and that’s why a pair carries roughly twice the single-spring cost. Replacing only the broken one is possible, but you’ll likely be calling again before long.
- Spring type. Torsion springs mounted on a shaft above the door and extension springs running along the horizontal tracks are different animals. Torsion work is more precise and more common on newer doors; extension springs are more often found on older doors in Cambridge’s triple-decker neighborhoods and two-family conversions, where the door hardware has often been patched over the years.
- Age and wear elsewhere. Cables, drums, rollers, and track all get inspected during a spring job. If the cable is fraying (a real safety concern, not a sales line), it’s cheaper to address it in the same visit than to come back later.
- Door weight and size. A wider or heavier door takes heavier springs, and heavier springs cost more. Oversized doors or doors with extra insulation land at the higher end.
- Access and setup. Tight garage ceilings, storage above the door, or a door that’s been out of service and sitting crooked can add time. Low headroom and unusual mounting need the technician to work around the structure.
- Brand and hardware. We work on the brand you already have across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Familiarity with a specific system means fewer surprises and a smoother estimate.
How to Save on Spring Replacement
Spring work is not where you want to cut corners on safety, but there are legitimate ways to keep the bill sensible.
- Get a free written estimate first. Ask exactly what’s included – the springs, cables, any rollers, and disposal. A number that leaves out parts isn’t really a price.
- Replace the pair when they’re close in age. Spending once on a matched set is usually cheaper over a couple of years than paying twice for two single-spring visits.
- Bundle the small stuff. If rollers are flat or a track is bent, having it handled during the spring replacement avoids a second service call. Our roller and track ranges are modest compared to a return trip.
- Don’t ignore the warning signs. A door that feels heavy to lift, a bang from the garage, or a gap in the springs overhead are reasons to call before the door stops moving. Catching it early keeps the repair in the lower half of the range.
- Ask what your door actually needs. A good technician diagnoses what’s failing, not what’s easiest to sell. We work across eight major brands, so the answer comes from the hardware, not from what’s on hand.
For a straightforward number on your own door, call (855) 870-5964. Estimates are free, and the written quote is the price.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Cambridge?
Between $180 and $340 for one spring, and about $360 to $680 for a matched pair. The written estimate confirms the exact figure for your door. Call (855) 870-5964 for a free quote.
Is it cheaper to replace one spring or both?
One spring is cheaper today at $180 – $340, but a pair at roughly twice that is usually the better value, because the second spring is nearly as worn as the one that broke. Call (855) 870-5964 and we’ll tell you what your door needs, not just what’s cheapest.
Does spring replacement cost more in an emergency?
No. The price is set per job by the written estimate, whether the door failed on a Sunday morning or a Wednesday afternoon. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 870-5964.
Can you replace a garage door spring the same day?
Often, yes – same-day service is available for spring failures when the parts for your door are on hand. Cambridge Garage Door Repair Co works across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which helps a technician arrive already familiar with your system. Call (855) 870-5964 to book.
Why does a broken spring cost more than I expected?
Because the spring is rarely the only worn part. Cables and rollers add to the bill, and a heavy or custom door pushes the job toward $340 or beyond per spring. The free estimate itemizes each piece so nothing is a surprise. Call (855) 870-5964.
Is a broken spring dangerous to leave alone?
Yes. A torsion spring is under heavy tension, and a door without a working spring can drop or fail unpredictably. Don’t try to wind, cut, or remove a spring yourself. Leave it to a trained technician – our technicians have up to 13 years of experience with this exact work. Call (855) 870-5964.
Why Choose Cambridge Garage Door Repair Co for Spring Work
We treat the door as a system, not a single broken part. A spring replacement starts with checking the cables, drums, track, and opener electronics so the fix holds. We handle opener work, panels, rollers, tracks, and full installations – so you don’t need to call a second company for the next stage of the job. Emergency service is available when a failed door means a security or safety problem, not just an annoyance. And we stay brand-agnostic: we fix what’s failing on the hardware you already own, whether that’s a LiftMaster opener, a Clopay door, or a Wayne Dalton system.
For a full look at what we cover, see Cambridge Garage Door Repair Co. Our team also serves homeowners across the surrounding area, and we’re glad to talk through your situation over the phone.
What Happens When You Call
Call (855) 870-5964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday – a call outside dispatch hours is booked into the next opening. We ask a few questions about the door, its brand, and what it’s doing, then arrange a free estimate. A technician inspects the spring, cables, and door balance, explains what’s failing and why, and leaves you with a written price. If you approve, the work is done and the door is tested before we leave. If you don’t, there’s no obligation. Either way, you know exactly what your door needs and what it costs.
Call (855) 870-5964 for a free spring replacement estimate in Cambridge.
Written by the team at Cambridge Garage Door Repair Co.
Pricing reflects the Cambridge market as of 2026. Cambridge Garage Door Repair Co offers free estimates – call (855) 870-5964.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Paige Anderson"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Renee Ziegler"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Emily Kim