Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Melrose?
Garage door work in Melrose typically runs $150 – $600 for a repair, and $700 – $2,200 for a full new door installation. Simple fixes like rollers or track realignment land near the bottom of that range, while spring repair, opener replacement, and new door installation climb toward the top. Those figures are typical estimated ranges for the Melrose market, not a quote: the written estimate you get on site sets the final price.
Garage doors are one system, not a collection of parts, so what you pay usually reflects what’s actually failing rather than one flat rate per visit. A door that won’t close might need a roller, a cable, or a whole opener, and the price difference between those is real. That’s why we diagnose first and quote in writing before any work starts. Call (855) 870-5964 for a free estimate, or keep reading for the full 2026 price breakdown.
Garage Door Cost Breakdown (2026)
Here’s what the common garage door jobs cost in Melrose this year. Every range below is a typical estimate, and the written estimate you receive is what you pay.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
One note on springs, because it trips people up. The spring range above is for a single spring. Most doors run a matched pair of torsion springs, and those are usually replaced together, so a pair generally costs about twice the single-spring range. Your technician will tell you whether you need one or both once the door is opened up.
What moves a job toward the high end: a door that’s out of square, hardware that’s seized from years of New England freeze-thaw cycles, an opener that needs a full replacement instead of a board or gear repair, or a panel that has to be sourced to match a discontinued profile. What keeps it low: a single worn roller, a track that slipped out of alignment, or an opener that just needs a sensor realigned. We work on the brand you already have, so a LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor door doesn’t automatically mean pricier parts or a second call to another company. We’re certified to work on all eight of those brands.
What Affects Garage Door Pricing in Melrose
Melrose sits inland in Middlesex County, and the local conditions shape both what fails and what it costs to fix. A few factors come up again and again:
- Age of the house and door. Melrose has a lot of older housing stock, and many homes still have the door that went up with the house or a replacement from decades later. Older doors often use extension springs rather than torsion, and the hardware on them is more likely to be worn, seized, or discontinued. Matching panels to an older door profile can push a panel replacement toward the top of its range.
- Freeze-thaw and winter weather. The cycling between hard freezes and thaws each winter works on cables, springs, and the metal itself. Cables fray, springs fatigue faster, and painted steel panels take on moisture at seams. A door that’s been through many Middlesex County winters is more likely to need cable or spring work than a door in a warmer climate.
- Spring type and count. Torsion springs cost more to replace than extension springs, and a matched pair costs roughly double a single spring. This is often the single biggest swing factor in a repair bill. Spring repair is one of the highest-risk jobs in the trade, so it’s also the one where doing it right matters most.
- Door size and weight. A double-car door carries heavier springs and a larger opener than a single-car door, and the parts cost more. If the door is oversized for a standard opening, new installation climbs toward the top of the range.
- Opener type and condition. A basic opener repair is at the low end. A full opener installation, especially of a smart opener with belt drive, sits higher. Whether the existing opener can be repaired or needs replacing is a call the technician makes after testing the board, gears, and safety sensors.
- Access and clearance. A tight garage ceiling or an unusual header height can add time to a track realignment or a new installation. It’s not dramatic, but it’s part of why two doors of the same size don’t always quote the same.
If you’re weighing whether to repair or replace, the honest answer depends on the door’s overall condition. A door with a single worn component is usually worth repairing. A door with multiple failing parts, a bent panel, and a worn opener often costs more to keep patching than to replace outright. We’ll give you both numbers in writing so you can decide.
Spring Repair Pricing in Detail
Spring repair is the job we get called for most, and it’s the one people ask about first. A single torsion spring runs $180 – $340 in Melrose, and a matched pair typically around twice that. Extension springs sit at the lower end; heavy torsion springs on a double door sit at the higher end.
A word of caution, because this is genuinely dangerous work. Torsion springs and the cables under them are under extreme tension. They can release violently if handled without the right tools and training, and a garage door is a heavy falling object. We don’t recommend any homeowner attempt spring or cable work themselves. A trained technician with the proper winding bars and clamps is the safe path, and it’s why spring repair is a dedicated service for us rather than an afterthought. If your door has a snapped spring, stop using the opener and call a professional.
How to Save on Garage Door Cost in Melrose
The biggest lever on price is catching problems before they compound. A few practical moves:
- Get a written estimate before work starts. Free estimates mean you can compare the scope and see exactly what’s being fixed. No surprises on the invoice.
- Fix small parts before they take out big ones. A worn roller or a misaligned track is cheap to correct. Left alone, a bad track can bend panels or strain the opener, which turns a $120 – $240 realignment into a several-hundred-dollar job.
- Replace springs as a matched pair when the door has two. It costs more up front, but replacing one spring while the other is equally worn usually means a second call sooner than you’d like.
- Lubricate the moving parts. Rollers, hinges, and the spring coils benefit from periodic lubrication. It’s a small habit that slows wear.
- Ask whether repair or replacement makes sense. We’ll give you the repair price and the installation price side by side so you can see the real math.
We offer free estimates across Melrose, and same-day service is available for most repairs. If you’re ready to get a number, call (855) 870-5964. Estimates are free, and the price is set per job by the written estimate.
Garage Door Service in Melrose and Nearby
We handle the whole door system, from opener to panel to full installation. That means one call for a LiftMaster opener that won’t reverse, a Clopay panel that took a hit, a Wayne Dalton door that’s off its track, or a Chamberlain opener that needs replacing. No second company for a second problem.
Our technicians have up to 13 years of experience, and they arrive familiar with the specific hardware already on your home. That brand familiarity matters: a Genie opener’s safety sensors behave differently from a Raynor door’s hardware, and diagnosing by brand saves time and guesswork. You can read more about who we are and how we work on the Cambridge Garage Door Repair Co page.
Emergency garage door service is available when a malfunctioning door becomes a safety or security problem, not just an inconvenience. If the door is stuck open, won’t close, or a spring has snapped, that’s a time-sensitive failure. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
FAQ – Garage Door Cost in Melrose
How much does a garage door repair cost in Melrose?
Most garage door repairs in Melrose run $150 – $600, depending on what failed. Roller replacement sits at $110 – $220, track realignment at $120 – $240, and cable repair at $130 – $250. Call (855) 870-5964 for an exact quote. Estimates are free.
How much does it cost to replace a garage door in Melrose?
New door installation in Melrose typically runs $700 – $2,200, depending on door size, material, and whether the opener needs replacing too. A single-car standard door sits at the low end; a double door with a smart opener sits higher. Call (855) 870-5964. The written estimate sets the final price.
Is it cheaper to repair or replace a garage door?
Repair is cheaper when one or two parts have failed: a spring, a cable, or an opener. Replacement makes more sense when the door has multiple failing panels, a worn opener, and repeated repairs that add up. A single spring repair at $180 – $340 almost always beats a new installation; a door with several issues can flip that math. Call (855) 870-5964 and we’ll quote both side by side at no charge.
Can you come today?
Yes, same-day service is available for most repairs in Melrose. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 870-5964 and we’ll book the next opening.
How much does spring repair cost, and do I need both springs?
Spring repair in Melrose runs $180 – $340 for one spring, and a matched pair typically costs about twice that. If your door runs two torsion springs and both are equally worn, replacing the pair is usually the smarter call. Call (855) 870-5964 for an estimate on your specific door.
Do you work on my brand of door or opener?
We’re certified to work on eight of the most common brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Technicians diagnose based on what’s actually failing rather than which parts are easiest to sell. Call (855) 870-5964.
Whether your door needs a $110 roller replacement or a full $2,200 installation, the first step is the same: a free written estimate that tells you exactly what’s wrong and what it costs. Our technicians have up to 13 years of experience, we work on the brand you already have, and we can handle everything from the opener to a complete new door. Call (855) 870-5964 to schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. You’ll get a written estimate before any work begins, and that estimate is the price.
Pricing reflects the Melrose market as of 2026. Cambridge Garage Door Repair Co offers free estimates – call (855) 870-5964.
Written by the team at Cambridge Garage Door Repair Co.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Paige Anderson"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Renee Ziegler"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Emily Kim