Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Arlington?
Garage door repair in Arlington typically costs $150 – $600, depending on what has failed and how many parts are involved. A single torsion or extension spring is the most common call at $180 – $340, while a full new door installation runs $700 – $2200. The written estimate sets the final price, and every estimate we provide is free.
We’re Cambridge Garage Door Repair Co, and we handle the whole system: opener electronics, springs, cables, rollers, tracks, panels, and complete installations. Our technicians have up to 13 years of experience and arrive familiar with the hardware already on your home, whether that’s LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor. Call (855) 870-5964. We answer 24/7.
Key Takeaways
- Most Arlington garage door repairs land between $150 and $600.
- Spring repair is $180 – $340 for one spring; a matched pair usually costs about twice that.
- New door installation is $700 – $2200, including measurement, removal, and testing.
- Estimates are free, and pricing is set per job by the written estimate.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break out by job type in Arlington. These are typical estimated ranges for this market. Your written estimate is the price that counts.
| Service | Typical Estimated Range (Arlington) |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A matched spring pair is usually replaced together, because both springs have taken the same load for the same amount of time. The spring range above is for one spring, so a pair costs about twice that. A door that has dropped hard, bounced, or come off its track often needs a spring plus a cable, which is why repairs stack into the general $150 – $600 band.
What pushes a job toward the top of a range: an opener board that needs replacing rather than a simple adjustment, a dented panel that has to be ordered in a matching color and profile, or a door that needs realignment after being driven into. What keeps it low: a single worn roller set, a track knocked out of plumb, a safety sensor that’s misaligned.
What Affects Garage Door Pricing in Arlington
- The door sits on a system, not a single part. Springs, cables, drums, rollers, and tracks share the load. When one fails, the others have usually been working harder. A technician who checks the whole assembly catches a stretched cable before it strands the door a week later.
- Spring type matters. Torsion springs, mounted on a shaft above the door, are more involved than extension springs that run along the tracks. Most Arlington homes we see run torsion setups, and those require a trained hand – a wound torsion spring stores serious energy and can cause severe injury if it’s handled without the right tools and technique.
- Opener age and brand. A Genie or Chamberlain unit that’s a few years old can often be repaired for the lower part of the opener range. A failing logic board on an older unit sometimes nudges you toward replacement instead – we’ll tell you honestly which side of that line you’re on.
- Panel availability. Matching a panel means matching a manufacturer’s profile and color. Clopay, Amarr, Wayne Dalton, and Raynor all handle that differently. In-demand panels can cost more to source than a common profile.
- Door size and material. A single-car door and a double-car door use different spring configurations and different amounts of material. Steel, wood-look, and insulated doors each price out differently on installation.
- What’s already wrong. A door that’s been noisy for months can hide a worn bearing, a bent track, and a cracked hinge under one symptom. A proper inspection finds the whole list before work starts, so nothing surprises you mid-job.
How to Save on Garage Door
The biggest lever is acting early. A door that’s been grinding or squealing for weeks usually has a cheap fix available at the moment – a worn roller, a dry hinge, a loose track bolt – and a more expensive one after the part fails completely. Listen to your door.
Second: fix the root cause the first time. Replacing a cable without addressing the reason it frayed puts you back at the starting line in a few months. We diagnose based on what’s actually failing, not which parts are easiest to swap.
Third: keep the opener on a reasonable schedule. A quick check of the safety sensors, the force settings, and the belt or chain tension costs nothing when it happens during another service visit, and it prevents the kind of failure that leaves you with a dead door in the morning.
Fourth: ask for an itemized estimate before work begins. Every estimate we give is free, priced per job, and written down – so you can see what each part of the repair costs and decide what to do now versus what can wait. Call (855) 870-5964 to book one.
Can You Fix the Door the Same Day?
In most cases, yes. Spring repairs, cable repairs, roller changes, track realignment, and many opener fixes happen on the same visit once we’ve confirmed the parts on your specific door. Same-day service is standard for Arlington when the call comes in early enough in the dispatch window.
Installation is different – new doors need correct measurement, ordering, and testing, so a full installation is booked ahead. For anything urgent, emergency garage door service is available for situations where a malfunctioning door means a real security or safety risk: a door stuck open, a door jammed half-up, a car locked inside a closed garage. Call (855) 870-5964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Should You Repair or Replace in Arlington?
The honest rule of thumb: repair when the frame, tracks, and panels are sound and the problem is mechanical – a spring, a cable, a roller, an opener. Replace when the door itself is failing structurally, when panels are damaged beyond matching, or when a long list of small failures makes a repair more expensive than it’s worth. For a single-season breakdown, repair almost always wins on cost. For an older door with multiple failing panels, a new installation at $700 – $2200 can be the smarter long-term spend.
FAQs – Garage Door Cost
How much does garage door repair cost in Arlington?
Garage door repair in Arlington typically costs $150 – $600 for most jobs. The exact range depends on which parts have failed and whether one or more systems are involved – a single worn roller sits at the low end, while a spring plus cable plus track realignment sits near the top. Call (855) 870-5964 for an exact quote – estimates are free.
How much does a new garage door cost in Arlington?
New door installation in Arlington typically runs $700 – $2200, including measurement, removal of the old door, and final testing. Size, material, insulation, and window options move the number within that range. Call (855) 870-5964 for an exact quote – estimates are free.
Is spring replacement more expensive than other repairs?
Spring repair is $180 – $340 for a single spring, and a matched pair usually costs about twice that because both springs are replaced together. That places spring work on the higher end of typical repairs, which reflects the skill and safety equipment required – torsion springs store a lot of energy and shouldn’t be touched without the right tools. Call (855) 870-5964 for an exact quote – estimates are free.
Can you repair an opener instead of replacing it?
Opener repair in Arlington typically costs $120 – $320 and is often the right call, especially on LiftMaster, Chamberlain, Genie, and Craftsman units that are otherwise healthy. A failing logic board or stripped gear sometimes makes replacement more sensible at $250 – $550. Call (855) 870-5964 for an exact quote – estimates are free.
What does a panel replacement cost?
Panel replacement typically costs $250 – $500 per panel, depending on the profile and color. Matching a Clopay, Amarr, Wayne Dalton, or Raynor panel to the door already on your home is the biggest variable. Call (855) 870-5964 for an exact quote – estimates are free.
What should I check before calling?
Check whether the opener light comes on and whether the safety sensors at the bottom of the tracks are aligned – a misaligned sensor mimics a dead opener. Then check whether the door balances manually (lift it a foot and let go; a balanced door stays put). If the door drops or feels heavy, stop and call us. A door that’s lost its spring tension can fall, and there’s no safe way to test a torsion spring without the proper tools. Call (855) 870-5964 for an exact quote – estimates are free.
Brands We Work On
We work on the brand you already have. Our technicians are certified to handle equipment from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – which means we arrive already familiar with the specific opener electronics and door hardware on your home, rather than diagnosing from scratch. That’s part of why repair estimates come out tight: less time spent figuring out what you’ve got, more time spent fixing it.
Complete System Service, Not a Single-Part Fix
Your garage door is a system – the opener, the springs, the cables, the rollers, the tracks, the panels all work together. Repairing one without checking the rest just moves the failure to the next part. That’s why every visit includes a full inspection of the assembly. For full-system scope, from opener to panel to new door installation, you’re talking to the right team: repair, opener work, dedicated spring repair, panel replacement, track work, and complete new installs.
For urgent situations, we’re available when it matters most. For planned upgrades, we measure, order, install, and test until the door cycles cleanly. Either way, you’re dealing with one company, not a series of specialists handing you off.
Get a Free Estimate Today
If your door is grinding, hanging crooked, stuck, or just overdue for a look, we’ll tell you exactly what’s wrong, what it will cost, and what can wait. Typical pricing for Arlington garage door work lands between $150 and $600 for repairs and $700 to $2200 for installation, and every estimate is written, itemized, and free. Call Cambridge Garage Door Repair Co at (855) 870-5964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Cambridge Garage Door Repair Co.
Pricing reflects the Arlington market as of 2026. Cambridge Garage Door Repair Co offers free estimates – call (855) 870-5964.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Paige Anderson"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Renee Ziegler"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Emily Kim