Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Cambridge Homeowners
A garage door that won’t close right, looks nothing like the rest of the house, or has been patched one too many times eventually stops being a repair problem and becomes a replacement question. Cambridge homes run old, and their garages show it: undersized single bays in Porter Square triple-deckers, wide double doors added onto postwar capes near Alewife, and a lot of tired steel panels that have been cycled tens of thousands of times. When the answer is a new door, our technicians have up to 13 years of experience measuring, ordering, and fitting full systems rather than just swapping parts. We’re certified on eight of the most common brands in the field, so we know the hardware already on your house. Estimates are free, and the price you agree to before work starts is the price. Call (855) 870-5964.
What Our Garage Door Installation Service Includes
Installation isn’t one job, it’s a few different jobs that share a name. A single door in a tight bay and a custom wood carriage door on a larger opening follow the same logic but not the same measurements, materials, or hardware. Here’s how we break it down so you know what you’re actually buying.
New Door Installation
New door installation means replacing the entire door and its operating hardware as one system, not just the panels you can see. You need it when a door has reached the end of its useful life, when the current opening was never built to standard, or when you’re changing the door’s size or style. We handle it from the first measurement to the final balance and safety test, and we check that the tracks, springs, and opener all match the new door’s weight rather than assuming the old hardware will carry it.
Single Car Door
A single car door covers a roughly nine-foot opening, which is the most common width on Cambridge’s narrower lots and older garages. It’s the right call when you have one bay, a tight driveway, or a space where a wider door would crowd the sidewalk or a neighbor’s fence line. We size the door to the actual opening, sort out the headroom above it, and make sure the spring is rated for that specific door weight; a spring matched to the wrong door is one of the quickest ways to end up back on the phone.
Double Car Door
A double car door spans roughly sixteen feet, and it’s usually the choice on wider lots, on properties with a detached two-car garage, or when a homeowner is replacing two separate doors with one opening. You’ll want it when the existing doors are mismatched, when one opener is struggling to lift a heavy assembled door, or when a wider opening simply makes more sense for how the driveway is used. We confirm the header and the framing can carry the span before anything is ordered, so the door you get is one the structure was built for.
Custom Garage Door
Custom doors are for openings that don’t fit a standard size, facades where the door needs to match a specific architectural style, and homes where the garage door is a visible part of the front elevation rather than a background element. You’d consider one when an off-the-shelf door would sit awkwardly, when the opening is out of square, or when the house calls for a look you can’t buy in a catalog width. We take detailed measurements of the opening and the surrounding trim, then work from those to make sure the finished door sits flush and operates smoothly in the space it’s actually going into.
Steel Doors
Steel is the most common material for the doors we install, and it’s usually the practical answer for a Cambridge garage that takes the brunt of a New England winter. It suits homeowners who want a clean, low-maintenance door that holds its shape through freeze-thaw cycles and doesn’t need repainting every few seasons. We check the gauge and insulation of the specific door against your opening and your habits; a well-insulated steel door changes how the garage feels and how hard the opener has to work. You can also read more about our broader garage door repair work if you’re not sure whether replacement is the right move yet.
Wood Doors
Wood doors are the choice for Cambridge homes where the garage is part of the architecture, particularly the craftsman and colonial styles common around Harvard Square and the older residential blocks. They’re also heavier than steel and need a frame that can carry that weight through wet seasons and dry ones, since wood moves as humidity changes. We factor that movement into the install, fit the hardware accordingly, and make sure the opener and springs are rated for a door that weighs more than the steel one it replaced.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We’re certified to work on eight of the most common garage door brands on the market, and that matters most at the installation stage, where a door and an opener have to be matched rather than bolted together and hoped for. Clopay is one of the brands we install most often, and we know how their panel profiles and insulation options behave in a Cambridge winter, where a door that binds in cold weather will bind for months. We also work extensively with LiftMaster openers, which means we can set the travel limits and force settings correctly for the specific door we’ve just hung rather than leaving the opener guessing. Chamberlain is another brand we’re familiar with, and we make sure the smart features and safety reversal actually work with the new door once it’s up.
Genie comes up often on older Cambridge garages where the opener was replaced at some point but the door wasn’t, and installing a new door usually means re-checking that opener’s settings against the new weight. Amarr, Wayne Dalton, Craftsman, and Raynor round out the eight brands we service, and each one has its own quirks in how the panels fit, how the springs are rated, and how the tracks want to be aligned. Whether you have a Clopay door you’re replacing, a LiftMaster opener you’d like to keep, or a Genie system that needs a new door to work with, our technicians diagnose based on what’s actually failing rather than which parts are easiest to sell. Whether you have one of these eight brands or any other make, we can help, and if you’re in a neighboring town you can also look at our garage door installation there.
Signs You Need Garage Door Installation Right Now
- The door has been patched more than once. If you’re calling for panel replacement on the same door for the second or third time in a few years, the panels aren’t the problem, the door is. Repeated patching usually means the structure underneath is failing and a new door is the cheaper path over the next few winters.
- The door won’t stay balanced. A door that drifts down on its own, or feels unnaturally heavy when you lift it by hand, has a spring or balance problem. When that balance issue keeps coming back after repairs, it often means the door’s weight has shifted beyond what the current hardware can handle.
- The tracks are bent or the panels are warped. A door that jumps, grinds, or rubs against the frame is telling you something is out of alignment. Bent tracks and warped panels are worth a professional look, since the fixes can quickly cost more than replacement on an older door.
- The door is letting in weather. Gaps at the bottom or sides, drafts you can feel, or water getting in during a thaw all point to a door that no longer seals. Cambridge’s freeze-thaw cycle is hard on old seals and old frames, and a modern door with a proper weather seal fixes both.
- You’ve changed the house and the door no longer fits the look. A renovation, a new siding color, or a front elevation change can leave an older garage door looking out of place. That’s a design decision rather than an emergency, but it’s still a good reason to talk through options before ordering anything.
If any of those sound familiar, it’s worth a free measurement and a written quote rather than another repair bill. We answer 24/7 on (855) 870-5964, and we can book a visit for a measure.
Our Garage Door Installation Process – Step by Step
- 1
Measure and assess the opening. We measure the actual opening, the headroom above it, and the side clearance, and we check whether the framing and header are sound. This is where most installation problems get avoided, since an out-of-square opening has to be dealt with before a door is ordered, not after it arrives.
- 2
Match the door to the hardware. Once we know the opening, we talk through door style, material, insulation, and how the existing opener or a new one fits the plan. We’re checking the spring and opener ratings against the door’s weight, which is the part homeowners tend to skip and which causes most of the callbacks we hear about.
- 3
Order and schedule. The door is ordered to the measurements, and we set a time to install it. This isn’t the same-day part of the trade; a new door is measured, ordered, and scheduled, and we’d rather take the time to get the measurement right than rush a fit.
- 4
Remove the old door and prep the opening. We take down the old door and its hardware, check the tracks and the mounting points, and prep the opening so the new door sits correctly. Springs and cables come off under controlled tension, which is why this is a job for people who do it every week rather than a weekend project.
- 5
Install, balance, and test. We hang the door, set the springs, align the tracks, and run the safety reversal and balance tests before calling it done. You get a walk-through of how the door and opener work, and you get the written estimate as the final word on the price.
Springs, cables, and the torsion assembly carry real stored energy, and a door that’s out of balance during a test can come down hard. We keep that work in trained hands and recommend homeowners don’t adjust springs or cables themselves. If you’re curious about the most safety-critical part of the trade, our garage door spring repair page goes into more detail, and if the opener is the part acting up, garage door opener repair covers that.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Cambridge?
A typical new door installation in Cambridge runs $700 – $2200 depending on the door size, material, insulation, and the state of the opening. That range covers the door and the hardware that has to come with it, and the written estimate sets the final price once we’ve seen the space.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2200 |
| Opener Installation (if you’re adding a new one) | $250 – $550 |
| Panel Replacement (if only one section is damaged) | $250 – $500 |
| Track Realignment (if the opening needs correcting first) | $120 – $240 |
A single car door generally lands toward the lower end of the installation range, and a double or custom door toward the upper end. Material is the other big factor: a standard steel door typically costs less than a wood door of the same size, and added insulation moves the number up. How much prep the opening needs also matters, since an older garage often needs tracks or framing corrected before the new door goes in.
To avoid overpaying, get the measure done before you commit, ask what’s included in the quote, and make sure the opener is part of the conversation rather than an afterthought bundled in later. Our free estimate covers the measurement, the door options, and the written price, and we don’t start work until you’ve agreed to it. It also helps to know what the smaller fixes cost so you can compare against replacement; garage door repair typically runs $150 – $600 depending on the fault.
Garage Door Installation Near Cambridge – Our Service Area
We install doors across Cambridge and the surrounding towns, including Somerville, Medford, Belmont, Arlington, Brookline, Watertown Town, Everett, Chelsea, Malden, Winchester, and Newton. Cambridge itself is compact, so a visit to a home in Inman Square or Cambridgeport is rarely far from the next one, and scheduling is usually straightforward. Free measurements are booked during dispatch hours, 7am to 7pm, Sunday through Friday. If you’re just outside the city, our garage door installation page covers the Watertown Town area, and you can always call us to check whether your address is in range.
Serving Cambridge, MA – Our Local Coverage Area
We serve Cambridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Cambridge
Garage door installation is the full replacement of a garage door and its operating hardware as a system, rather than a repair to one part. It covers measuring the opening, choosing the door and material, matching the springs and opener to the door’s weight, removing the old door, and testing the new one for balance and safety. In Cambridge, where garages range from old single bays to larger detached two-car spaces, the measure is the step that decides what the rest of the job looks like.
A standard single or double door installation usually takes most of a day once the door has arrived, with custom or wood doors sometimes running longer. The timeline starts well before install day, though, because the door has to be measured and ordered to fit your opening. We’ll give you a realistic schedule when we do the measure, and if the opening needs prep work that adds time, we’ll tell you before the job starts rather than after. Call (855) 870-5964 to book a measurement.
New door installation in Cambridge typically runs $700 – $2200, depending on size, material, insulation, and how much prep the opening needs. A single steel door usually sits toward the lower end, while a double, custom, or wood door sits toward the upper end, and a new opener adds $250 – $550 on top if you need one. The written estimate sets the final price, and we agree it with you before any work starts. Call (855) 870-5964 for an exact quote; estimates are free.
Yes, we’re certified to work on Clopay doors and LiftMaster openers, along with Chamberlain, Genie, Amarr, Wayne Dalton, Craftsman, and Raynor. At the installation stage, that means we can match a new door to the opener already on your wall, or set up a new LiftMaster or Chamberlain unit to work correctly with the door we’ve just installed. If your equipment is from one of those eight brands, the technician arrives already familiar with how it’s built.
No, installation isn’t a same-day service, because the door has to be measured and ordered to fit your opening before it can go in. What we can do is book the free measure right away and give you a written price once we’ve seen the space. We answer 24/7 on (855) 870-5964, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. For a broken door that can’t wait, ask about emergency garage door service instead.
Coverage depends on the door and hardware you choose, and we’ll go through what’s covered before you commit. Manufacturer coverage on the door itself is common, and the installation work is something we stand behind; the exact terms are set out in writing with your estimate. Ask about it at the measure so there are no surprises later. Call (855) 870-5964 and we’ll walk you through it.
Clear the garage floor and the driveway in front of the door, and move anything hanging near the tracks or stored against the walls. If the opener is being replaced too, make sure the power outlet is accessible. Have a parking plan for the day, since the driveway will be in use, and let us know about pets or anything fragile near the opening. We’ll confirm the rest when we schedule.
Schedule Your Garage Door Installation Service in Cambridge Today
If your Cambridge garage door has reached the point where another repair doesn’t make sense, a free measurement and a written price is the next step. Call (855) 870-5964 and we’ll book it. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, upfront pricing, and the written quote is the price you pay.
Written by the team at Cambridge Garage Door Repair Co.