Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Newton?
Garage door repair in Newton typically costs $150 – $600, and most jobs land in the lower half of that range once a technician confirms what’s actually failing. A single broken spring runs $180 – $340, opener repairs $120 – $320, and a full new door installation $700 – $2200 depending on size, material and how the opening is framed. Every job is priced by a written estimate before any work starts, and that estimate is the price.
We work on the brand you already have. Our technicians are certified across eight of the most common garage door brands on the market – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – so the diagnostic starts from the hardware that’s already on your house, not from a guess. Our technicians have up to 13 years of experience, and that matters most on the parts that fail under tension.
Key Takeaways
- Typical garage door repair in Newton: $150 – $600.
- One spring replaced: $180 – $340. A matched pair usually costs about twice that.
- New door installation: $700 – $2200.
- Estimates are free, and you get the price in writing before work begins.
- We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Garage Door Cost Breakdown (2026)
Here’s what each job typically runs in Newton. These are estimated ranges, not quotes: the length of the door, the number of springs, opener model and whether a panel or track is bent all move the number. Your written estimate sets the final price.
| Service | Typical estimated range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A few things push a Newton job toward the top of a range. A matched pair of torsion springs nearly doubles a spring bill because the second spring carries the same tension and worn springs rarely match a new one’s lift. A two-car door weighs considerably more than a single, which means heavier-gauge springs, stiffer track and a stronger opener to move it. Insulated doors and windows in the top section run higher than a basic steel panel. And an opener that’s been failing for weeks can take the control board with it, turning a small repair into a larger one.
It can go down too. If your opener is fine and only the rollers are noisy, that’s a small job. If a single panel is dented and the rest of the door is sound, we replace the panel rather than the door. We diagnose based on what’s actually failing, not on which parts are easiest to sell, and we’ll tell you when a repair is the smaller number.
What Affects Garage Door Pricing in Newton
Newton’s housing stock does more to shape a garage door bill than most people expect. A lot of the city’s homes predate the standard eight-foot-wide single door, and older garages were often built to fit whatever car was parked in them – which means a replacement door has to be measured and sometimes re-framed rather than pulled off a shelf. Here’s what tends to move the number:
- Door size and weight. A double-wide door needs heavier springs and more lifting force than a single, and that shows up in both the spring cost and the opener spec. Oversized or non-standard openings in older Newton garages take longer to measure and fit.
- Spring type and count. Torsion springs mounted above the door and extension springs running along the track are different jobs with different parts. If both springs in a pair are worn, replacing one leaves you back on the phone in a few months, so we usually recommend the pair. That pair costs about twice the one-spring range.
- How the garage sits on the lot. Newton has plenty of garages tucked under the house, set behind a shared drive, or built into a slope. Low headroom above the door limits which openers and track setups will fit, and tight side clearance changes how a torsion system is installed.
- New England freeze and thaw. Repeated freezing and thawing works on the concrete and the hardware. Track that shifts a fraction of an inch over a winter throws the door out of alignment, and rollers and hinges stiffen in cold weather. A door that runs fine in May can grind in January, and that grinding is what wears out an opener motor.
- Brand and parts availability. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor all have their own parts lines. Working on a brand we know means fewer surprises on the estimate.
- Opener age and electronics. A simple chain-drive unit is a quick repair. A newer smart opener with Wi-Fi, battery backup or a wall-mounted jackshaft design has more that can fail, from the logic board to the travel limits, and the diagnosis takes longer.
How to Save on Garage Door Costs in Newton
Price is not the only lever you have. The biggest savings come from fixing the cause rather than the symptom.
Fix a small problem before it grows
A worn roller is cheap. A worn roller that lets the door rack sideways and chews through a hinge, a track section and eventually a cable is not. The same goes for an opener that’s straining: a stripped gear sounds like a stripped gear until it burns out the motor. Catching the noise early keeps a $110 – $220 roller job from turning into a $150 – $600 repair.
Replace springs as a pair
It sounds like more money up front, and it is. But matched springs wear at the same rate, so replacing one means the second is already near the end of its cycle count. Replacing both together, at about twice the one-spring range, usually costs less than two separate visits and leaves you with a door that lifts evenly.
Get the estimate in writing before work starts
You should not have to guess what a job will cost. We give a free estimate with the parts and labor broken out, and the written estimate is the price – ask for it before anything comes off the door.
Ask whether repair or replacement makes more sense
If the door is dented, the springs are healthy and the opener works, repair almost always wins. If panels, tracks, cables and hardware are all tired at once, a new door at $700 – $2200 can be the less expensive path over a couple of years. We’ll give you both numbers and let you decide.
For an exact figure on your door, call (855) 870-5964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Why Spring Repair Is Priced on Its Own
Torsion springs are the single most dangerous part of any garage door, and they’re priced accordingly. A torsion spring holds the entire weight of the door under tension, and that tension doesn’t disappear when the spring breaks. Cables, brackets and drums store the same energy, and the wrong move on a loaded spring can cause serious injury. This isn’t a job to attempt with a pair of winding bars and a video. Our technicians handle spring repair as a dedicated service because it calls for the right tools, a controlled winding process and an understanding of how the whole system balances.
That’s also why we don’t price spring work like a commodity. A broken spring isn’t only a broken spring – it’s the point where an unbalanced door starts wearing its cables, rollers and opener, and we check all of it while we’re there. We also repair cables, which are the other tension-bearing part of the system, and we’ll flag a frayed cable before it becomes a snapped one. If you need a wider view of what we handle, the Cambridge Garage Door Repair Co page covers the full range.
Garage Door Installation Cost in Newton
A new garage door in Newton runs $700 – $2200, and the spread comes from three things: door size, material and insulation. A basic single steel door sits at the low end. A double door with insulation and windows in the top panel sits at the high end. Material matters too – aluminum and steel are on the lower side, wood and custom designs cost more and need more care in a climate that swings from humid summers to freezing winters.
Installation is more than hanging a door. It’s measuring the opening, checking the spring and track spec against the door’s weight, mounting and balancing the springs, wiring the opener and testing the safety reverse. Older Newton garages often need the frame adjusted or a low-headroom setup, and that work is part of what the estimate covers. We handle it from first measurement to final test, so you’re not calling a second company to finish the opener.
If you’ve got a working door and you’re only upgrading the opener, that’s a smaller job: $250 – $550 for a new unit installed and tested, with the safety sensors aligned and the travel limits set.
Opener Repair and Installation Costs
Opener repair runs $120 – $320, and a full replacement $250 – $550. Which one you need depends on what’s actually wrong. A remote that won’t work or a wall button that’s dead is often a logic board or a sensor issue, and that’s a repair. A motor that’s burned out or a gear that’s stripped beyond replacement is a replacement. We work across the leading smart and traditional opener brands, including LiftMaster, Chamberlain and Genie, and we’ll tell you which one you’re looking at before we touch anything.
One thing worth knowing: if the opener keeps failing, the door is often the cause. A door that’s out of balance or dragging on a bent track forces the opener to work harder than it was built to, and it fails again. That’s the whole-system view – opener, springs, cables, panels and track all connected – and it’s why we diagnose before we replace.
Emergency Garage Door Service in Newton
There’s a difference between a noisy door and a door that’s a problem right now. A door stuck open overnight leaves the house exposed. A door hanging off one track, or a spring that’s snapped with the door partway down, is a safety issue for anyone walking under it. Those are the calls we treat as urgent.
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm, and we’re closed Saturday. Same-day service is available for most repairs, and the price doesn’t change because the call was urgent – the written estimate sets the cost per job.
What a Typical Garage Door Visit in Newton Looks Like
When a technician arrives, the first step is a balance and travel check: running the door by hand, listening for grinding, watching the track and rollers and checking the spring tension. Then the opener gets tested – safety reverse, travel limits, sensor alignment. Only after that does the estimate get written. Most repairs, from a roller swap to a spring replacement, are done in a single visit. Panel replacement and track realignment can take a little longer depending on what’s bent and whether parts need to be matched to your door’s profile.
New installations are scheduled separately since they need measurement, a door ordered to fit and a full day set aside for the install and test. You get the estimate before any of that starts.
FAQs – Garage Door Cost in Newton
How much does garage door repair cost in Newton?
Garage door repair in Newton typically costs $150 – $600, depending on the part and the size of the door. A single spring runs $180 – $340, cable repair $130 – $250, and opener repair $120 – $320. Call (855) 870-5964 for a free estimate – the written number is the price.
How much does a new garage door cost in Newton?
A new garage door installed in Newton typically runs $700 – $2200. A basic single steel door sits near the low end; a double door with insulation and windows sits near the top. Call (855) 870-5964 and we’ll measure your opening and give you a written estimate.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door itself is sound. A spring, cable or roller fix at $110 – $340 beats a new door at $700 – $2200. Replacement starts to make sense when panels, tracks, cables and hardware are all worn at once. Call (855) 870-5964 and we’ll price both options for your door.
How much does one spring cost, and do I need two?
One spring replaced typically costs $180 – $340. If your door has a matched pair, both usually get replaced together, and a pair costs about twice that range. Call (855) 870-5964 and we’ll tell you which setup your door has and what the job involves.
Can you come today?
Same-day service is available for most repairs in Newton. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 870-5964 for a free estimate.
What Happens When You Call
Tell us what the door is doing – won’t open, won’t close, grinding, hanging crooked, spring snapped – and the brand if you know it. That’s usually enough to pre-load the right parts and get a technician out with the tools for your system. Estimates are free, the price is set per job by the written estimate, and you’ll know what the job costs before anyone starts working.
Call (855) 870-5964. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. From opener to panel to full installation, it’s one call for the whole door.
Pricing reflects the Newton market as of 2026. Cambridge Garage Door Repair Co offers free estimates – call (855) 870-5964.
Written by the team at Cambridge Garage Door Repair Co.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Paige Anderson"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Renee Ziegler"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Emily Kim