Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Everett?
Garage door repair in Everett typically costs $150 – $600, and most jobs we’re called out for land in the middle of that range. A single spring replacement runs $180 – $340, a new door installation runs $700 – $2200, and the exact figure depends on the brand of hardware already on your home and what’s actually failing. Every price on this page is a typical estimate for the Everett market as of 2026; the written estimate we hand you after looking at the door sets the final price.
Everett homeowners tend to call for the same handful of things: a torsion spring that snapped on a cold morning, an opener that runs but won’t lift the door, a panel dinged by a car bumper, or a track knocked loose. We work on the brand you already have, and we treat the whole door as a system, so the technician who arrives can look at the opener, springs, panels, cables, and tracks in one visit rather than sending you off to find a second company.
Key Takeaways
- Most garage door repairs in Everett run $150 – $600, with spring work at $180 – $340 for one spring.
- A new door installation runs $700 – $2200, depending on size, material, and what’s reused.
- Pricing depends on your door’s brand, hardware wear, and how urgent the call is, not on a flat fee.
- Estimates are free, upfront pricing, and we work on eight of the major door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Cambridge Garage Door Repair Co handles spring repair, opener work, panels, and full installation.
Call (855) 870-5964 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Cost Breakdown (2026)
Here’s how the pricing breaks down by job type for Everett. These are typical estimated ranges, not quotes. The written estimate sets the final price after we look at your door and your hardware.
| Job Type | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A word on springs: the $180 – $340 range is for one spring. Torsion doors usually carry a matched pair, and when one spring breaks the other is close behind. A pair is usually replaced together, so a pair costs about twice that range. We’ll tell you honestly whether the second spring looks ready to go or has plenty of life left.
What pushes a job toward the top of a range? A few things. Aftermarket or mismatched hardware that has to be brought back to a matched set. A door that wasn’t maintained and has several worn parts at once: rollers, cables, and a stretched spring, for example. A non-standard door width that means a panel has to be ordered. A brand where the opener board or motor assembly costs more. Cable and spring work on a heavy wood door with a lot of weight to move also tends to sit higher than on a lighter steel door.
What keeps a job near the bottom? One clearly failed part on an otherwise healthy door. A simple opener fix like a sensor out of line. Rollers that are worn but the rest of the system is sound. When one thing is wrong and the rest of the door checks out, the repair stays simple.
What Affects Garage Door Pricing in Everett
- The brand on your door. We work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, so there’s no guesswork about what’s in front of us. Brand matters for cost because the parts and boards differ. A common opener with a widely available board costs less to fix than a less common model that needs a fresh assembly.
- Spring type and count. Torsion springs and extension springs are different jobs with different labor and parts. Torsion is the more technical service, and it’s the one we treat as its own dedicated service. Remember the range is per spring, and a pair runs about twice that.
- How much of the door is worn. A single bad roller is a small job. A door with a broken spring, a frayed cable, and three worn rollers is a bigger one. Older Everett doors that haven’t been serviced in a while often have several parts at the end of their life at once.
- Door size and weight. A standard one-car door is lighter and simpler than a wide two-car door, and that moves both repair and installation pricing.
- Opener age and electronics. Opener repair at $120 – $320 covers everything from a sensor fix to a gear and sprocket rebuild. If the board is dead and the unit is old, a new opener at $250 – $550 may be the better money.
- Whether the door is repairable. A dented panel can be replaced at $250 – $500, but a door with bent tracks, a warped bottom section, and a failing opener might cost more to keep alive than to replace. That’s the decision we walk through with you before you spend anything.
One local note: the Everett market has a lot of older housing stock with doors of mixed age, so we often see brand hardware that’s been swapped piecemeal over the years. That’s not a problem for us, but it can nudge a price because the technician looks at the whole system instead of the one part that failed.
Spring Repair in Everett: What It Costs and Why It Matters
Spring repair in Everett runs $180 – $340 for one spring on a typical residential door. That’s the highest-risk, most technical repair in this trade, and it’s the job we treat with the most care. A torsion spring holds the full weight of the door under tension. If it’s released wrong, the result is serious injury, not a bent track.
Because of that, we don’t walk homeowners through doing it themselves. The honest answer when your spring snaps is: keep the door closed, keep people and cars clear of it, and call a trained technician. We carry dedicated spring repair as its own service because it’s a different kind of job from a sensor fix or a panel swap. Our technicians have up to 13 years of experience, and spring work is a big part of what that experience covers.
When you call, we’ll tell you whether you’re looking at one spring or a pair, and we’ll give you the range up front. Call (855) 870-5964 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Opener Repair vs. Opener Installation in Everett
If your opener runs but the door doesn’t move, or the door reverses on its own, or the remote stopped working, you’re probably in the $120 – $320 opener repair range. A common culprit is a misaligned safety sensor, which is a low-cost fix. A worn gear and sprocket inside the unit is a modest repair. A dead circuit board on an older model sometimes tilts the math toward replacement.
If the fix isn’t worth it, opener installation runs $250 – $550. We handle LiftMaster, Chamberlain, Genie, and Craftsman openers among others, and we set the travel limits and test the safety reverse before we leave. The right call depends on the age and condition of what you have, and that’s a conversation we have with you, not a decision we make for you.
New Door Installation in Everett
A new door installation in Everett runs $700 – $2200. That range covers the door, the hardware, and installation from the first measurement to the final test. What moves the number: door size (single versus double), material (steel at the lower end, wood or insulated composite toward the top), window and design options, and whether existing tracks and the opener can be reused or need replacement.
Installation is a good move when the door has several problems at once: bent sections, failing hardware, and an opener on its last legs. Rather than pay to keep patching a door that’s past its service life, you get a door that runs quietly and needs nothing for years. If you’re weighing it, we can look at the door and tell you honestly which way the money goes.
How to Save on Garage Door Costs in Everett
- Catch it early. A noisy door or a slow-moving roller is cheap to fix. A snapped spring and a bent track on the same door is not. Address small changes before they become a full-system job.
- Fix the actual failure, not a symptom. A door that’s hard to lift might just need its spring tension reset, not a new opener. Because we diagnose what’s failing rather than what’s easiest to sell, you avoid paying for a part you don’t need.
- Get a written estimate first. Estimates are free. You’ll see the number before any work starts, and the written estimate sets the price you pay.
- Ask about a pair of springs. If one torsion spring snapped and the other is the same age, replacing both at once saves you a second visit and a second labor charge.
- Keep the rest of the system healthy. A door that’s balanced and correctly tensioned puts less strain on the opener, which means the opener lasts longer. Regular inspection of cables and rollers pays for itself.
Call (855) 870-5964 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Same-Day Repair and Emergency Service in Everett
Sometimes a door doesn’t just need fixing, it needs fixing now. If a broken door means your home or car isn’t secure, or a family member can’t get the car out, that’s the call for our emergency garage door service. We treat those situations seriously: a jammed or open door is a real problem, and we’re set up for it.
When you call, we book you into the next available dispatch. We answer the phone 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Pricing on urgent work is set the same way as any other job: per job, by the written estimate. There’s no separate urgent-work price on this page because the estimate is where the number comes from.
If your door fails on a Saturday, call anyway. We’re closed Saturday, but we’ll book you into the next opening on Sunday and get you scheduled.
Why Brand Matters When You Get a Quote
Two doors that look the same from the street can need very different work. That’s why we ask about the brand before we arrive. We service eight of the major names in the trade: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your door carries one of those brands, the technician already knows the hardware and the common failure points on that model. If it isn’t on the list, we’ll tell you up front so you can decide how to proceed.
That brand-agnostic approach is the point. We diagnose based on what’s actually failing, not which parts are easiest to sell. A door is a system: opener, springs, cables, track, rollers, and panels all work together. Fixing one part without checking the rest usually means a second call a few months later. Looking at the whole system in one visit is how you end up paying for the repair once.
FAQs – Garage Door Pricing in Everett
How much does garage door repair cost in Everett?
Garage door repair in Everett typically costs $150 – $600, with most single-part repairs landing between $150 and $350. The price depends on what failed and the brand of hardware on your door. Call (855) 870-5964 for an exact quote. Estimates are free.
How much does spring repair cost in Everett?
Spring repair in Everett runs $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that range. For an exact quote, call (855) 870-5964.
Is it cheaper to repair or replace my garage door?
Repair is cheaper when one part has failed and the rest of the door is sound: a spring, a cable, or a roller usually costs $110 – $340. Replacement at $700 – $2200 makes more sense when the door has several problems at once, like bent panels, failing hardware, and an opener near the end of its life. We’ll tell you which way the numbers point. Call (855) 870-5964 for a free estimate.
How much does a new garage door cost in Everett?
A new door installation in Everett runs $700 – $2200, covering the door, hardware, and installation from measurement to final test. Size, material, and window options move the number. Call (855) 870-5964 for a free estimate.
Can you come today if my door is stuck?
Often yes. We offer same-day service when a broken door means a security or safety problem, and we run fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 870-5964. We answer 24/7.
Do you charge extra for emergency calls?
Pricing is set per job by the written estimate, the same as any other repair. Call (855) 870-5964 and we’ll give you the range before any work starts.
Talk to Us About Your Everett Garage Door
Whether you’re facing a snapped spring, an opener that’s given up, or you’re ready to price a new door, the next step is the same: a free estimate. Call (855) 870-5964 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 13 years of experience, we work on the brand you already have, and the written estimate sets the final price. From opener to panel to full installation, it’s one call.
Written by the team at Cambridge Garage Door Repair Co.
Pricing reflects the Everett market as of 2026. Cambridge Garage Door Repair Co offers free estimates – call (855) 870-5964.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Paige Anderson"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Renee Ziegler"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Emily Kim